描述相同 > 第2028页
General Description The LP2981 is a 100 mA, fixed-output voltage regulator designed specifically to meet the requirements of battery-powered applications. Using an optimized VIP (Vertically Integrated PNP) process, the LP2981 delivers unequaled performance in all specifications critical to battery-powered designs: Dropout Voltage. Typically 200 mV @ 100 mA load, and 7 mV @ 1 mA load. Ground Pin Current. Typically 600 µA @ 100 mA load, and 80 µA @ 1 mA load. Sleep Mode. Less than 1 µA quiescent current when ON/OFF pin is pulled low. Smallest Possible Size. SOT-23 and micro SMD packages use an absolute minimum board space. Precision Output. 0.75% tolerance output voltages available (A grade). Eleven voltage options, from 2.5V to 5.0V, are available as standard products. Product Highlights:Ultra low dropout voltageOutput voltage accuracy 0.75% (A Grade)Guaranteed 100 mA output currentSmallest possible size (SOT-23, micro SMD package)< 1 µA quiescent current when shutdownLow ground pin current at all load currentsHigh peak current capability (300 mA typical)Wide supply voltage range (16V max)Fast dynamic response to line and loadLow ZOUT over wide frequency rangeOvertemperature/overcurrent protection-40°C to +125°C junction temperature range 产品现货库存报价| LDO Regulator Pos 5V 0.8A 6-Pin(5+Tab) TO-263 Rail Product Highlights:eLow ground pin currentLoad regulation of 0.02%15µA quiescent current in shutdown modeGuaranteed output current of 0.8A DCAvailable in SOT-223,TO-263 and TO-220 packagesOutput voltage accuracy ± 1.5%Error# flag indicates output status (LP3961)Sense option improves better load regulation (LP3964)Extremely low output capacitor requirementsOvertemperature/overcurrent protection-40°C to +125°C junction temperature range DescriptionThe LP3961/LP3964 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The LP3961/LP3964 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3961/LP3964 to operate under extremely low dropout conditions.Dropout Voltage: Ultra low dropout voltage; typically 24mV at 80mA load current and 240mV at 800mA load current.Ground Pin Current: Typically 4mA at 800mA load current.Shutdown Mode: Typically 15µA quiescent current when the shutdown pin is pulled low.Error# Flag: Error# flag goes low when the output voltage drops 10% below nominal value (for LP3961).SENSE: Sense pin improves regulation at remote loads. (For LP3964)Precision Output Voltage: Multiple output voltage options are available ranging from 1.2V to 5.0V and adjustable (LP3964), with a guaranteed accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). ApplicationsMicroprocessor power suppliesGTL, GTL+, BTL, and SSTL bus terminatorsPower supplies for DSPsSCSI terminatorPost regulatorsHigh efficiency linear regulatorsBattery chargersOther battery powered applications 产品现货库存报价| The LP3962/LP3965 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The LP3962/LP3965 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3962/LP3965 to operate under extremely low dropout conditions. Dropout Voltage: Ultra low dropout voltage; typically 38mV at 150mA load current and 380mV at 1.5A load current. Ground Pin Current: Typically 5mA at 1.5A load current. Shutdown Mode: Typically 15µA quiescent current when the shutdown pin is pulled low. Error# Flag: Error# flag goes low when the output voltage drops 10% below nominal value (for LP3962). SENSE: Sense pin improves regulation at remote loads. (For LP3965) Precision Output Voltage: Multiple output voltage options are available ranging from 1.2V to 5.0V Product Highlights:Ultra low dropout voltageLow ground pin currentLoad regulation of 0.04%15µA quiescent current in shutdown modeGuaranteed output current of 1.5A DCAvailable in SOT-223,TO-263 and TO-220 packagesOutput voltage accuracy ± 1.5%Error# flag indicates output status (LP3962)Sense option improves better load regulation (LP3965)Extremely low output capacitor requirementsOvertemperature/overcurrent protection-40°C to +125°C junction temperature rangePotential Applications:Microprocessor power suppliesGTL, GTL+, BTL, and SSTL bus terminatorsPower supplies for DSPsSCSI terminatorPost regulatorsHigh efficiency linear regulatorsBattery chargersOther battery powered applications 产品现货库存报价|
| 产品描述 |
| General Description The LP2981 is a 100 mA, fixed-output voltage regulator designed specifically to meet the requirements of battery-powered applications. Using an optimized VIP (Vertically Integrated PNP) process, the LP2981 delivers unequaled performance in all specifications critical to battery-powered designs: Dropout Voltage. Typically 200 mV @ 100 mA load, and 7 mV @ 1 mA load. Ground Pin Current. Typically 600 µA @ 100 mA load, and 80 µA @ 1 mA load. Sleep Mode. Less than 1 µA quiescent current when ON/OFF pin is pulled low. Smallest Possible Size. SOT-23 and micro SMD packages use an absolute minimum board space. Precision Output. 0.75% tolerance output voltages available (A grade). Eleven voltage options, from 2.5V to 5.0V, are available as standard products. Product Highlights:Ultra low dropout voltageOutput voltage accuracy 0.75% (A Grade)Guaranteed 100 mA output currentSmallest possible size (SOT-23, micro SMD package)< 1 µA quiescent current when shutdownLow ground pin current at all load currentsHigh peak current capability (300 mA typical)Wide supply voltage range (16V max)Fast dynamic response to line and loadLow ZOUT over wide frequency rangeOvertemperature/overcurrent protection-40°C to +125°C junction temperature range产品现货库存报价 |
| LDO Regulator Pos 5V 0.8A 6-Pin(5+Tab) TO-263 Rail Product Highlights:eLow ground pin currentLoad regulation of 0.02%15µA quiescent current in shutdown modeGuaranteed output current of 0.8A DCAvailable in SOT-223,TO-263 and TO-220 packagesOutput voltage accuracy ± 1.5%Error# flag indicates output status (LP3961)Sense option improves better load regulation (LP3964)Extremely low output capacitor requirementsOvertemperature/overcurrent protection-40°C to +125°C junction temperature range DescriptionThe LP3961/LP3964 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The LP3961/LP3964 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3961/LP3964 to operate under extremely low dropout conditions.Dropout Voltage: Ultra low dropout voltage; typically 24mV at 80mA load current and 240mV at 800mA load current.Ground Pin Current: Typically 4mA at 800mA load current.Shutdown Mode: Typically 15µA quiescent current when the shutdown pin is pulled low.Error# Flag: Error# flag goes low when the output voltage drops 10% below nominal value (for LP3961).SENSE: Sense pin improves regulation at remote loads. (For LP3964)Precision Output Voltage: Multiple output voltage options are available ranging from 1.2V to 5.0V and adjustable (LP3964), with a guaranteed accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature). ApplicationsMicroprocessor power suppliesGTL, GTL+, BTL, and SSTL bus terminatorsPower supplies for DSPsSCSI terminatorPost regulatorsHigh efficiency linear regulatorsBattery chargersOther battery powered applications产品现货库存报价 |
| The LP3962/LP3965 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very fast to step changes in load which makes them suitable for low voltage microprocessor applications. The LP3962/LP3965 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3962/LP3965 to operate under extremely low dropout conditions. Dropout Voltage: Ultra low dropout voltage; typically 38mV at 150mA load current and 380mV at 1.5A load current. Ground Pin Current: Typically 5mA at 1.5A load current. Shutdown Mode: Typically 15µA quiescent current when the shutdown pin is pulled low. Error# Flag: Error# flag goes low when the output voltage drops 10% below nominal value (for LP3962). SENSE: Sense pin improves regulation at remote loads. (For LP3965) Precision Output Voltage: Multiple output voltage options are available ranging from 1.2V to 5.0V Product Highlights:Ultra low dropout voltageLow ground pin currentLoad regulation of 0.04%15µA quiescent current in shutdown modeGuaranteed output current of 1.5A DCAvailable in SOT-223,TO-263 and TO-220 packagesOutput voltage accuracy ± 1.5%Error# flag indicates output status (LP3962)Sense option improves better load regulation (LP3965)Extremely low output capacitor requirementsOvertemperature/overcurrent protection-40°C to +125°C junction temperature rangePotential Applications:Microprocessor power suppliesGTL, GTL+, BTL, and SSTL bus terminatorsPower supplies for DSPsSCSI terminatorPost regulatorsHigh efficiency linear regulatorsBattery chargersOther battery powered applications产品现货库存报价 |
| General Description The LP3985 is designed for portable and wireless applications with demanding performance and space requirements. The LP3985 is stable with a small 1µF ±30% ceramic or high-quality tantalum output capacitor. The micro SMD requires the smallest possible PC board area - the total application circuit area can be less than 2.0mm x 2.5mm, a fraction of a 1206 case size. The LP3985's performance is optimized for battery powered systems to deliver ultra low noise, extremely low dropout voltage and low quiescent current. Regulator ground current increases only slightly in dropout, further prolonging the battery life. An optional external bypass capacitor reduces the output noise without slowing down the load transient response. Fast start-up time is achieved by utilizing an internal power-on circuit that actively pre-charges the bypass capacitor. Power supply reje Product Highlights:Miniature 5-I/O micro SMD and SOT-23-5 packageLogic controlled enableStable with ceramic and high quality tantalum capacitorsFast turn-onThermal shutdown and short-circuit current limit产品现货库存报价 |
| General Description The LPC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltage from +5V to +15V, rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input V OS , drift, and broadband noise as well as voltage gain (into 100 k and 5 k ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 0.5 mW. This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process. See the LPC660 datasheet for a Quad CMOS operational amplifier Product Highlights:Rail-to-rail output swing Micropower operation (<0.5 mW) Specified for 100 k and 5 k loads High voltage gain120 dBLow input offset voltage3 mVLow offset voltage drift1.3 µV/°CUltra low input bias current2 fAInput common-mode includes GND Operating range from +5V to +15V Low distortion0.01% at 1 kHzSlew rate0.11 V/µsFull military temperature range available产品现货库存报价 |
| RESISTOR, POWER, 5K6, 0.5W, 1%, 1206产品现货库存报价 |
| The MAX660 CMOS charge-pump voltage converter inverts a positive voltage in the range of 1.5V to 5.5V to the corresponding negative voltage. The MAX660 uses two low cost capacitors to provide 100 mA of output current without the cost, size, and EMI related to inductor based converters. With an operating current of only 120 µA and operating efficiency greater than 90% at most loads, the MAX660 provides ideal performance for battery powered systems. The MAX660 may also be used as a positive voltage doubler. The oscillator frequency can be lowered by adding an external capacitor to the OSC pin. Also, the OSC pin may be used to drive the MAX660 with an external clock. A frequency control (FC) pin selects the oscillator frequency of 10 kHz or 80 kHz. Product Highlights:Inverts or doubles input supply voltageNarrow SO-8 Package6.5Ohm typical output resistance88% typical conversion efficiency at 100 mASelectable oscillator frequency: 10 kHz/80 kHzPotential Applications:Laptop computersCellular phonesMedical instrumentsOperational amplifier power suppliesInterface power suppliesHandheld instruments产品现货库存报价 |
| RESISTOR, FIXED, R020, 3.0W, 1%, 2512产品现货库存报价 |
| Buffer/Line Driver 6-CH Non-Inverting 3-ST CMOS 16-Pin MDIP产品现货库存报价 |
| is a recommended repl. 712 pcs. in stock.产品现货库存报价 |
| RESISTOR, POWER, 3K9, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 2K7, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 2K2, 0.5W, 1%, 1206产品现货库存报价 |
| BET030041-PV05SIID产品现货库存报价 |
| 82A0112-24-0产品现货库存报价 |
| The PC16550D is an improved version of the original 16450 Universal Asynchronous Receiver/Transmitter (UART). Functionally identical to the 16450 on powerup (CHARACTER mode)* the PC16550D can be put into an alternate mode (FIFO mode) to relieve the CPU of excessive software overhead. In this mode internal FIFOs are activated allowing 16 bytes (plus 3 bits of error data per byte in the RCVR FIFO) to be stored in both receive and transmit modes. All the logic is on chip to minimize system overhead and maximize system efficiency. Two pin functions have been changed to allow signalling of DMA transfers. The UART performs serial-to-parallel conversion on data characters received from a peripheral device or a MODEM, and parallel-to-serial conversion on data characters received from the CPU. The CPU can read the complete status of the UART at any time during the functional operation. Status information reported includes the type and condition of the transfer operations being performed by the UART, as well as any error conditions (parity, overrun, framing, or break interrupt). The UART includes a programmable baud rate generator that is capable of dividing the timin Product Highlights:Capable of running all existing 16450 software.Pin for pin compatible with the existing 16450 except for CSOUT (24) and NC (29). The former CSOUT and NC pins are TXRDY# and RXRDY#, respectively.After reset, all registers are identical to the 16450 register set.In the FIFO mode transmitter and receiver are each buffered with 16 byte FIFO's to reduce the number of interrrupts presented to the CPU.Adds or deletes standard asynchronous communication bits (start, stop, and parity) to or from the serial data.Holding and shift registers in the 16450 Mode eliminate the need for precise synchronization between the CPU and serial data.Independently controlled transmit, receive, line status, and data set interrupts.Programmable baud generator divides any input clock by 1 to (216 - 1) and generates the 16 × clock.Independent receiver clock input.MODEM control functions (CTS, RTS, DSR, DTR, RI, and DCD).Fully programmable serial-interface characteristics:5-, 6-, 7-, or 8-bit charactersEven, odd, or no-parity bit generation and detection1-, 1½-, or 2-stop bit generationBaud generation (DC to 1.5M baud).False start bit detection.Complete status reporting capabilities.TRI-STATE® TTL drive for the data and control buses.Line break generation and detection.Internal diagnostic capabilities:Loopback controls for communications link fault isolationBreak, parity, overrun, framing error simulation.Full prioritized interrupt system controls.产品现货库存报价 |
| The PC16552D is a dual version of the PC16550D Universal Asynchronous Receiver/Transmitter (UART). The two serial channels are completely independent except for a common CPU interface and crystal input. On power-up both channels are functionally identical to the 16450*. Each channel can operate with on-chip transmitter and receiver FIFOs (FIFO mode) to relieve the CPU of excessive software overhead. In FIFO mode each channel is capable of buffering 16 bytes (plus 3 bits of error data per byte in the RCVR FIFO) of data in both the transmitter and receiver. All the FIFO control logic is on-chip to minimize system overhead and maximize system efficiency. Signalling for DMA transfers is done through two pins per channel (TXRDY# and RXRDY#). The RXRDY# function is multiplexed on one pin with the OUT 2# and BAUDOUT functions. The CPU can select these functions through a new register (Alternate Function Register). Each channel performs serial-to-parallel conversion on data characters received from a peripheral device or a MODEM, and parallel-to-serial conversion on data characters received from the CPU. The CPU can read the complete status of each channel at any time. Sta Product Highlights:Dual independent UARTsCapable of running all existing 16450 and PC16550D softwareAfter reset, all registers are identical to the 16450 register setRead and write cycle times of 84 nsIn the FIFO mode transmitter and receiver are each buffered with 16-byte FIFOs to reduce the number of interrupts presented to the CPUHolding and shift registers in the 16450 Mode eliminate the need for precise synchronization between the CPU and serial dataAdds or deletes standard asynchronous communication bits (start, stop, and parity) to or from the serial dataIndependently controlled transmit, receive, line status, and data set interruptsProgrammable baud generators divide any input clock by 1 to (216 - 1) and generate the 16 × clockMODEM control functions (CTS, RTS, DSR, DTR, RI, and DCD)Fully programmable serial-interface characteristics:5-, 6-, 7-, or 8-bit charactersEven, odd, or no-parity bit generation and detection1-, 1½-, or 2-stop bit generationBaud generation (DC to 1.5M baud) with 16 × clockFalse start bit detectionComplete status reporting capabilitiesTRI-STATE® TTL drive for the data and control busesLine break generation and detectionInternal diagnostic capabilities:Loopback controls for communications link fault isolationBreak, parity, overrun, framing error simulationFull prioritized interrupt system controls *Can also be reset to 16450 Mode under software control.Note: This part is patented.产品现货库存报价 |
| The PC16552D is a dual version of the PC16550D Universal Asynchronous Receiver/Transmitter (UART). The two serial channels are completely independent except for a common CPU interface and crystal input. On power-up both channels are functionally identical to the 16450*. Each channel can operate with on-chip transmitter and receiver FIFOs (FIFO mode) to relieve the CPU of excessive software overhead. In FIFO mode each channel is capable of buffering 16 bytes (plus 3 bits of error data per byte in the RCVR FIFO) of data in both the transmitter and receiver. All the FIFO control logic is on-chip to minimize system overhead and maximize system efficiency. Signalling for DMA transfers is done through two pins per channel (TXRDY# and RXRDY#). The RXRDY# function is multiplexed on one pin with the OUT 2# and BAUDOUT functions. The CPU can select these functions through a new register (Alternate Function Register). Each channel performs serial-to-parallel conversion on data characters received from a peripheral device or a MODEM, and parallel-to-serial conversion on data characters received from the CPU. The CPU can read the complete status of each channel at any ti Product Highlights:Dual independent UARTsCapable of running all existing 16450 and PC16550D softwareAfter reset, all registers are identical to the 16450 register setRead and write cycle times of 84 nsIn the FIFO mode transmitter and receiver are each buffered with 16-byte FIFOs to reduce the number of interrupts presented to the CPUHolding and shift registers in the 16450 Mode eliminate the need for precise synchronization between the CPU and serial dataAdds or deletes standard asynchronous communication bits (start, stop, and parity) to or from the serial dataIndependently controlled transmit, receive, line status, and data set interruptsProgrammable baud generators divide any input clock by 1 to (216 - 1) and generate the 16 × clockMODEM control functions (CTS, RTS, DSR, DTR, RI, and DCD)Fully programmable serial-interface characteristics:5-, 6-, 7-, or 8-bit charactersEven, odd, or no-parity bit generation and detection1-, 1½-, or 2-stop bit generationBaud generation (DC to 1.5M baud) with 16 × clockFalse start bit detectionComplete status reporting capabilitiesTRI-STATE® TTL drive for the data and control busesLine break generation and detectionInternal diagnostic capabilities:Loopback controls for communications link fault isolationBreak, parity, overrun, framing error simulationFull prioritized interrupt system controls *Can also be reset to 16450 Mode under software control.Note: This part is patented.产品现货库存报价 |
| RESISTOR, POWER, 1K8, 0.5W, 1%, 1206产品现货库存报价 |
| These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage (BI-FET II technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift. Product Highlights:Internally trimmed offset voltage:15 mVLow input bias current:50 pALow input noise voltage:16nV/SqrtHzLow input noise current:0.01 pA/SqrtHzWide gain bandwidth:4 MHzHigh slew rate:13 V/µsLow supply current:3.6 mAHigh input impedance:1012Low total harmonic distortion:<=0.02%Low 1/f noise corner:50 HzFast settling time to 0.01%:2 µs产品现货库存报价 |
| RESISTOR, POWER, 1K2, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 820R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, PRECISION, 37K4, 0.1%, 0603产品现货库存报价 |
| RESISTOR, POWER, 560R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, PRECISION, 383K, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 374R, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 374K, 0.1%, 0603产品现货库存报价 |
| RESISTOR, FIXED, R010, 3.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R006, 2.5W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R004, 2.5W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R10, 2.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R075, 2.0W, 1%, 2512产品现货库存报价 |
| 44A0811-18-9-US产品现货库存报价 |
| RESISTOR, POWER, 470R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 390R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 270R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 220R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 180R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 120R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, PRECISION, 365K, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 35K7, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 32R4, 0.1%, 0603产品现货库存报价 |
| RESISTOR, POWER, 68R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 56R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 47R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 33R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 27R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 22R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, POWER, 12R, 0.5W, 1%, 1206产品现货库存报价 |
| RESISTOR, PRECISION, 6K81, 0.1%, 0603产品现货库存报价 |
| RESISTOR, FIXED, R018, 2.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R010, 2.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, FIXED, R007, 2.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, POWER, 820K, 0.33W, 1%, 0805产品现货库存报价 |
| RESISTOR, POWER, 680K, 0.33W, 1%, 0805产品现货库存报价 |
| ADAPTOR, XLR RCPT TO DVI-I PLUG产品现货库存报价 |
| TR16-70-0产品现货库存报价 |
| Standard Circular Connector 3P F XLR & ADAPTERS GOOSENECK SET 230MM产品现货库存报价 |
| RESISTOR, POWER, 560K, 0.33W, 1%, 0805产品现货库存报价 |
| RESISTOR, POWER, 390K, 0.33W, 1%, 0805产品现货库存报价 |
| Standard Circular Connector INSERT MINICON FML WITHOUT CONTACTS产品现货库存报价 |
| Standard Circular Connector CABLE SHELL MINICON MATING W/CHUCK NEEDS产品现货库存报价 |
| Standard Circular Connector INSERT MINICON MALE WITHOUT CONTACTS产品现货库存报价 |
| TXR40AB90-2014BI Search Keywords:boot adapters, input/output,产品现货库存报价 |
| Standard Circular Connector CONTACT MINICON MALE CRIMP GOLD产品现货库存报价 |
| TXR40AC90-2412AI产品现货库存报价 |
| RESISTOR, POWER, 270K, 0.33W, 1%, 0805产品现货库存报价 |
| RESISTOR, POWER, 330K, 0.33W, 1%, 0805产品现货库存报价 |
| RESISTOR, PRECISION, 169K, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 162R, 0.1%, 0603产品现货库存报价 |
| XLR Connectors 5P F TO 5P F ADAPTER PRE-WIRED产品现货库存报价 |
| XLR Connectors 5P M TO 5P M ADAPTER PRE-WIRED产品现货库存报价 |
| Conn Housing Screw ST产品现货库存报价 |
| RESISTOR, PRECISION, 59R, 0.1%, 0402产品现货库存报价 |
| RESISTOR, METAL , 8K2, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 82K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 820K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 7K5, 0.75W, 1%产品现货库存报价 |
| RESISTOR, PRECISION, 14R7, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 62K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 7K5, 0.25W, 1%产品现货库存报价 |
| RESISTOR, PRECISION, 14K3, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 147R, 0.1%, 0603产品现货库存报价 |
| 44A0111-18-3-US产品现货库存报价 |
| RESISTOR, METAL , 620R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 56R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 560R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 51K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 4K99, 0.6W, 1%产品现货库存报价 |
| RESISTOR, METAL , 68R, 0.25W, 1%产品现货库存报价 |
| 44A0111-20-3-US产品现货库存报价 |
| RESISTOR, METAL , 680K, 0.25W, 1%产品现货库存报价 |
| RESISTOR, METAL , 4K7, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 47R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 47R, 0.25W, 1%产品现货库存报价 |
| RESISTOR, CARBON , 1R5, 0.5W, 5%产品现货库存报价 |
| RESISTOR, PRECISION, 12K4, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 124R, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 121R, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 39R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, 2512, 620R 1%, 1.5W产品现货库存报价 |
| RESISTOR, METAL , 40R2, 0.6W, 1%产品现货库存报价 |
| RESISTOR, PRECISION, 11K3, 0.1%, 0603产品现货库存报价 |
| RESISTOR, CARBON , 560R, 0.25W, 5%产品现货库存报价 |
| RESISTOR, PRECISION, 10R7, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 10K7, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 27K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 36K5, 0.6W, 1%产品现货库存报价 |
| RESISTOR, CARBON , 9K1, 0.33W, 5%产品现货库存报价 |
| RESISTOR, METAL , 200K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 1K2, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 200R, 0.25W, 1%产品现货库存报价 |
| RESISTOR, METAL , 1K5, 0.25W, 1%产品现货库存报价 |
| RESISTOR, METAL , 1K0, 0.25W, 1%产品现货库存报价 |
| 81044/12-24-4产品现货库存报价 |
| RESISTOR, METAL , 150R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 150K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 130R, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 16K, 0.25W, 1%产品现货库存报价 |
| RESISTOR, CARBON , 4K3, 0.33W, 5%产品现货库存报价 |
| RESISTOR, PRECISION, 1K96, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 1K87, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 1K6, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 11K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 130R, 0.25W, 1%产品现货库存报价 |
| RESISTOR, METAL , 120K, 0.25W, 1%产品现货库存报价 |
| RESISTOR, METAL , 100K, 0.75W, 1%产品现货库存报价 |
| RESISTOR, METAL , 110K, 0.25W, 1%产品现货库存报价 |
| RESISTOR, CARBON , 2M7, 0.33W, 5%产品现货库存报价 |
| RESISTOR, CARBON , 2K4, 0.33W, 5%产品现货库存报价 |
| CIRCULAR, SIZE 20, 5WAYS, PIN (L/C)产品现货库存报价 |
| RESISTOR, PRECISION, 1K18, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 1K15, 0.1%, 0603产品现货库存报价 |
| RESISTOR, PRECISION, 1K07, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 1K65, 0.6W, 1%产品现货库存报价 |
| RESISTOR, PRECISION, 19K1, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , 18K2, 0.6W, 1%产品现货库存报价 |
| 81044/12-20-1产品现货库存报价 |
| RESISTOR, PRECISION, 178R, 0.1%, 0603产品现货库存报价 |
| RESISTOR, METAL , R018, 1.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, METAL , R15, 1.0W, 1%, 2512产品现货库存报价 |
| RESISTOR, METAL , 6K98, 0.6W, 1%产品现货库存报价 |
| RESISTOR, METAL , 6K81, 0.6W, 1%产品现货库存报价 |
| RESISTOR, METAL , 147K, 0.6W, 1%产品现货库存报价 |
| RESISTOR, CARBON , 560K, 0.5W, 5%产品现货库存报价 |
| RESISTOR, METAL , R082, 0.25W, 1%, 1206产品现货库存报价 |
| RES, THICK FILM, 267K, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 182K, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 182K, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 124K, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 124K, 100MW, 1%, 0402产品现货库存报价 |
| BREAKOUT BOARD, POWR1014A, WITH BOOK产品现货库存报价 |
| CONNECTOR, MICRO SD, PUSH PUSH, 1.45MM产品现货库存报价 |
| RES, THICK FILM, 178R, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 16R2, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 165K, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 294R, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 97K6, 100MW, 1%, 0402产品现货库存报价 |
| CAR LIGHTER PLUG产品现货库存报价 |
| RES, THICK FILM, 66K5, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 20.5 KOHM, 0.5W, 1%产品现货库存报价 |
| RES, THICK FILM, 15K4, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 14R7, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 137R, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 105R, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 78R7, 100MW, 1%, REEL产品现货库存报价 |
| REWORK SYSTEM, MBT 301/PS-90/SX-90产品现货库存报价 |
| RES, THICK FILM, 28K7, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 23K7, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 23K7, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 19K1, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 19K1, 100MW, 1%, 0402产品现货库存报价 |
| 44A0111-18-94产品现货库存报价 |
| RES, THICK FILM, 13K3, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 13K3, 100MW, 1%, 0402产品现货库存报价 |
| SWITCH, TACT ILLUM GREEN, R/A, SMT产品现货库存报价 |
| RESISTOR, THICK FILM, 12.1 OHM, 0.5W, 1%产品现货库存报价 |
| RESISTOR, THICK FILM, 105 OHM, 0.5W, 1%产品现货库存报价 |
| RES, THICK FILM, 11R8, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 118R, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 22R6, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 6K65, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 6K65, 100MW, 1%, 0402产品现货库存报价 |
| RES, THICK FILM, 4K53, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 4K53, 100MW, 1%, 0402产品现货库存报价 |
| RESISTOR, THICK FILM, 845 OHM, 0.2W, 1%产品现货库存报价 |
| RESISTOR, THICK FILM, 76.8 OHM, 0.2W, 1%产品现货库存报价 |
| RES, THICK FILM, 68.1 KOHM, 0.2W, 1%产品现货库存报价 |
| RESISTOR, THICK FILM, 5.9 KOHM, 0.2W, 1%产品现货库存报价 |
| RES, THICK FILM, 10R7, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1M05, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1K02, 250MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1M91, 125MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1K37, 100MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1M5, 125MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1M21, 125MW, 1%, REEL产品现货库存报价 |
| RES, THICK FILM, 1K37, 100MW, 1%, 0402产品现货库存报价 |
| RESISTOR, 9M1, 0.125W, 1%, 1206, REEL产品现货库存报价 |
| RESISTOR, 9M1, 0.125W, 1%, 1206产品现货库存报价 |
页数:
1
1100
1200
1300
1400
1500
1600
1700
1800
1930
1940
1950
1960
1970
1980
1990
2000
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2050
2060
2070
2080
2090
2100
2110
2120
2200
2300
2400
2500
2600
2700
2800
2900
3000
4000
5000
6000
7000
8000
9000
10000
20000
27955